Baby Monitor Dual Receiver Bundle - Sony - SY-NTM910DUAL

Baby Monitor Dual Receiver Bundler
- SY-NTM910DUAL
- Basic Bullets (Short) Includes One Transmitter and Two Receivers
-900 MHz Technology
-27 Channels to Minimize Interference
-Built-In Rechargeable Battery in the Receiver
-Voice Activation Mode
-Out of Range Indicator
-Spec/Feature Bullets (Standard) Includes One Transmitter and Two Receivers
-900 MHz Technology
-27 Channels Minimize Interference
-Water Resistant1 Receiver
-Built-In Rechargeable Battery in the Receiver
-Voice Activation Mode
-5 Sound-Sensor Activity Lights
-Out of Range Indicator
-Belt Clip
-AC/DC Operation
-Footnotes
-1. Not meant to be immersed in or come into continuous contact with water.
- 900 MHz Technology: extends the range of the BabyCall Monitor allowing you take the receiver farther from the nursery and still hear activities in the nursery. 27 Channels Minimize Interference: The BabyCall Monitor uses the FM transmission system with channel selector to locate the clearest channel, helping to eliminate interference for clearer communication. Water Resistant1 Receiver: Use the monitor even in the kitchen or bathroom. Built-In Rechargeable Battery: in the receiver is convenient and saves money over replaceable batteries. Voice Activation Mode: Eliminates most extraneous background noise for clearer transmission. 5 Sound-Sensor Activity Lights: Alerts you when your baby is making sounds, when the receiver is out of range, and even when the battery is low. Out of Range Indicator: The unit will beep and light up when it is out of range. Belt Clip: Allows you to wear the receiver as you move about your home, keeping hands free for other activities. AC/DC Operation : Operates on both your standard household Current or supplied rechargeable batteries.
- Audio Frequency Range : 900MHz
-Antenna System : Flexible Round
-Channel Selection : 27
-Capability Nursery Monitor : Yes
-Location : Nursery
-Convenience Alarm : 5 Sound Sensor Activity Lights, Out of Range Indicator
-General Design : Nursery Monitor with belt clip
-Inputs and Outputs DC-In : 1 (receiver)
-Power Requirements : Transmitter: AC 120V, 60 Hz; Receiver: DC 3V or AC 120V, 60 Hz (with supplied AC Adaptor)
-Output Power : 120mW (using supplied AC Adaptor), 55mW (using 2.4V DC)
-Battery Type : Receiver: BP-T51 rechargeable battery (supplied)
-Speaker Dimensions : 2 1/4in (57mm)
-Speaker Type : Mono
-Weights and Measurements Weight (Approx.) : Transmitter: 9 oz (255g); Receiver: 5 5/8 oz (160g)
-Dimensions (Approx.) : Transmitter: W 4 1/4in x H 4 1/4in x D 1 15/16in (106 x 107 x 48mm); Receiver: W 3 7/8in x H 3 7/8in x D 1 11/16in (96 x 96 x 41.5mm)
-